Garage fans Lowes – Wiring an electric fan for your home requires patience, attention and research. Electrical wiring is dangerous and must be handled with care. Most fans find average use at home alone three phase motors that do not operate at 120 or 220 volts. Before connecting one of these electric fans, they have all the documentation from their manufacturer, such as installation instructions and wiring, within walking distance. These documents should be studied and understood before beginning any wiring. They also provide warnings and safety precautions to follow.
Shut off power to the circuit that will power the garage fans Lowes. Make sure that the fan is secure and properly supported. Read fan manufacturer’s wiring instructions before beginning. Locate the three fan motor wires. There must be a black wire, a white wire and a green or bare wire. The black wire is the hot wire, which supplies power to the fan. The white wire is the common wire, which completes the circuit and brings out the fan. The green or bare wire is the ground wire.
Look in the electrical box and pull out the two black and white cable splices. Remove the plastic spin caps off the two joints. Connect the black wire from the ceiling fan to the black wire connection on the electrical box. Then place a new plastic twist cap on that splice. Remove the plastic spin cap on the white splice and connect the white garage fans Lowes wire to the white cable splice. Put a new plastic twist on that joint as well.